Our Soft Contact Lenses Range
Nissel Custom - Prosthetic
A specialised hand painted high water content lens with a range of uses including prosthetic and cosmetic. Highly reproducible and easy to fit, giving more practitioners the confidence to help any patient requiring a customised lens. Please refer to our Nissel Custom Image Guide for acceptable images.
Images courtesy of Angela Taylor FBDO CL Truro
Material: Contaflex Filcon II 3
Water Content: 77%
Permeability (Dk): 45 x 10 -11
Base Curve (mm): 6.60 to 10.40 (0.20 steps)
Diameter (mm): 11.00 to 22.00 (0.50 steps)
Power Range: -30.00D to +30.00D (0.25D Steps)
Higher powers may be available
Not all base curves are available in diameters above 16.50mm.
Cyl Powers: -6.00DC to -0.75DC (0.25D Steps)
Axis Direction: 5° to 180° (5° steps)
Centre Thickness (mm) @14.50mm: -3.00 = 0.12
Iris Diameters (mm): 11.50, 12.00, 12.50, 13.00, 13.50
Clear / Open pupil diameters (mm): 2.00, 2.50, 3.00, 3.50, 4.00, 4.50, 5.00, 6.00
Black / Closed pupil diameters (mm): 2.50, 3.00, 3.50, 4.00 4.50, 5.00, 6.00, 7.00, 8.00, 9.00
Iris enhanced to match digital images
Clear and black pupils
Offset Pupil / iris available
High water content
Spherical and toric designs
Large Specification range
Up to 2 fitting lenses supplied at no charge
Check out our Information guide
Check out our fitting guide
Check out our image guide
No fitting set is available for the Nissel Custom range of lenses. Up to 2 fitting lenses are supplied at no cost.
When happy with the fit and vision (if required) of the lens, the lens can be disposed of and a new lens ordered for Hand Painting. Please send a high resolution digital image (jpeg) of the eye to be matched. This should be taken with a digital camera in good light; a slit lamp camera should not be used. Images of inferior quality will be rejected and will require re-submitting.
Please refer to our Nissel Custom Image sheet for guidance